Chemistry lab: Difference between revisions

Revision as of 16:04, 10 August 2025

A small chemical lab inside K18, 2nd floor.

DO NOT use any of the pipes in the room. They are not connected and leaking.

Because there is no water system, fresh water must be taken from downstairs in the bucket. Waste water must be taken downstairs.

The waste water bucket must contain only chemicals diluted to safe levels - follow the guidance for your project.

Please don't put anything more dangerous than dirt and soap in the soapy water bucket.

Resin 3D printer, including resin curing stuff, supporting tools, and the resin printing log
Brown glass bottles
PCB etching set, including jars with half-used chemicals and the PCB etching journal
Stickers and markers for labelling
Whiteboards made of plastic cardboard plus dry-erase markers
Buckets for waste water
Soap and other cleaning tools
A lab book and pens

@@ Line 1: / Line 1: @@
 A small chemical lab inside K18, 2nd floor.
-Contains:
+== Workstations (tables) ==
+* one covered with tiles, for working with open chemicals
+* one regular desk for writing and computering
+== Precautions ==
+DO NOT use any of the pipes in the room. They are not connected and leaking.
+== Water buckets ==
+Because there is no water system, fresh water must be taken from downstairs in the bucket. Waste water must be taken downstairs.
+The waste water bucket must contain only '''chemicals diluted to safe levels''' - follow the guidance for your project.
+Please don't put anything more dangerous than dirt and soap in the soapy water bucket.
+== Equipment ==
 * [[Resin printer|Resin 3D printer]], including resin curing stuff, supporting tools, and the resin printing log
 * Brown glass bottles
@@ Line 10: / Line 24: @@
 * Buckets for waste water
 * Soap and other cleaning tools
-* A general lab book and pens
+* A lab book and pens
-Don't just go in and use it. Find the person responsible first.
 [[Category:Manufacturing]]
 [[Category:Technical]]